Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)

Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)
Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)
Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)
Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)

Share:


Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)

Specifications

Brand: ATE # 03.2523-0811.3 # 040019

Supplier: Soon Heng Motor Supply Co.

E-mail: sales@soonhengmotor.com.my

OE Information: A0012956807, A0002958207, A0002956507, A0002954007

Diameter [mm]: 23.8


  • Part can be used for Mercedes-Benz W114 230.6/ 250/ 280, W115 200/ 220/ 230.4/ 200D/ 220D/ 240D, W123 200/ 230/ 280/ 200D/ 220D/ 240D/ 300D, W111/ W112 280SE, W108/ W109 280S/SE/SEL/ 300SEL, W116 280S/SE/SEL, C107 280SLC, W126 280S/SE/SEL and R107 280SL.
  • Make sure that the base of the cylinder is clean and that there are no dirt or corrosion that could make it difficult to properly mount it.
  • The cylinder needs to fit into the base without being forced.
  • The push rod must be positioned in the center of the base on the lever that pushes the pressure plate.
  • The head of the push rod which couples the lever pushing the pressure plate, should not have any markings left from handling it which could impede the normal rotation. It is important that the push rod will be mounted in the required angle to reduce the abrasion of the seal, to avoid damages and to ensure the correct method.
  • Kindly drop us a message by providing your vehicle chassis number to avoid incompatible part.


Mercedes-Benz W114, W115, W123, W111, W112, W108, W109, W116, C107, W126, and R107 - Clutch Slave Cylinder (ATE)